Siren/Bell & Sound Relay Trouble

Siren/Bell & Sound Relay Trouble

A Siren/Bell (External Siren) or Sounder (Internal Piezoelectric Sounder) Relay Trouble is a fault condition. This fault indicates that you have an electrical problem with the alarm system's audio output circuit. It is often found that water damage, condensation, corrosion, wiring damage, may be responsible for this condition.

Please contact ADVCOMM at 1-866-442-5050 to arrange for a technician.

    • Related Articles

    • System Battery Trouble / Panel Low Battery

      Your alarm system battery supplies backup power to operate your alarm system during a power outage. All alarm panels operate on mains power and contain a back-up battery, unfortunately different manufacturers use different batteries in the alarm ...
    • Sensor Trouble

      This signal is a non-alarm event that indicates that a sensor circuit is not complete. A Sensor Trouble renders the particular circuit inoperative and no longer able to provide security as designed. An incomplete circuit maybe caused by a fault with ...
    • Communication Trouble

      A Communication Trouble is confined to customers utilizing what is referred to as “multi mode monitoring”. Although the alarm system may still be monitored by alternative communication pathways, a Communication Trouble signal indicates that one or ...
    • Test w/ System Trouble

      Each day your system sends us a daily check in, it may indicate the you have trouble present on your system. Please check the message on your keypad/panel to see what trouble condition exists. Generally, you will need a technician to resolve the ...
    • Fire Loop Trouble

      A Fire Loop Trouble is a fault condition. Although this fault may indicate that you have an electrical problem with the system’s fire circuit, it is often found that a contaminated smoke sensor may be responsible for this condition. Over time, dust ...