Sounder Loop Short

Sounder Loop Short

A Sounder Loop Short indicates that you might have some faulty wiring from the alarm panel to the external siren or a fault in the alarm panel. This wiring or alarm panel fault requires a technician to attend and check the system. If the signal persists, please call during business hours to arrange a technician.

If you have wireless sounder then this signal can indicate that the batteries in the sounder are getting weak and need replacing.

    • Related Articles

    • Protection Loop Short

      A Protection Loop Short indicates that you might have some faulty wiring for a particular zone or a faulty alarm panel. This wiring or alarm panel fault requires a technician to attend and check the system. If the signal persists, please call during ...

    • Fire Loop Trouble

      A Fire Loop Trouble is a fault condition. Although this fault may indicate that you have an electrical problem with the system’s fire circuit, it is often found that a contaminated smoke sensor may be responsible for this condition. Over time, dust ...

    • Siren/Bell & Sound Relay Trouble

      A Siren/Bell (External Siren) or Sounder (Internal Piezoelectric Sounder) Relay Trouble is a fault condition. This fault indicates that you have an electrical problem with the alarm system's audio output circuit. It is often found that water damage, ...